pub enum Domain<'a, T> where
T: 'a + BitStore, {
Enclave {
head: BitIdx<T::Mem>,
elem: &'a T::Alias,
tail: BitTail<T::Mem>,
},
Region {
head: Option<(BitIdx<T::Mem>, &'a T::Alias)>,
body: &'a [T::Mem],
tail: Option<(&'a T::Alias, BitTail<T::Mem>)>,
},
}
Expand description
Granular representation of the memory region containing a
BitSlice
.
BitSlice
regions can be described in terms of edge and center
elements, where the edge elements retain the aliasing status of the
source BitSlice
handle, and the center elements are known to be
completely unaliased by any other view. This property allows any
BitSlice
handle to be decomposed into smaller regions, and safely
remove any aliasing markers from the subregion of memory that no
longer requires them for correct access.
This enum splits the element region backing a BitSlice
into
maybe-aliased and known-unaliased subslices. If you do not need to
work directly with the memory elements, and only need to firmly
specify the aliasing status of a BitSlice
, see the BitDomain
and BitDomainMut
enums.
Lifetimes
'a
: The lifetime of the referent storage region.
Type Parameters
T
: The element type of the sourceBitSlice
handle, including aliasing markers.
Variants
Enclave
Fields
elem: &'a T::Alias
An aliased view of the element containing the BitSlice
.
This is necessary even on immutable views, because other views to the referent element may be permitted to modify it.
Indicates that a BitSlice
is contained entirely in the
interior indices of a single memory element.
Region
Fields
head: Option<(BitIdx<T::Mem>, &'a T::Alias)>
If the BitSlice
started in the interior of its first
element, this contains the starting index and the base
address.
body: &'a [T::Mem]
All fully-spanned, unaliased, elements.
This is marked as bare memory without any access protections, because it is statically impossible for any other handle to have write access to the region it covers. As such, a bitslice that was marked as entirely aliased, but contains interior unaliased elements, can safely remove its aliasing protections.
Safety Exception
&BitSlice<O, T::Alias>
references have access to a
.set_aliased
method, which represents the only means in
bitvec
of writing to memory without an exclusive &mut
reference.
Construction of two such shared, aliasing, references over
the same data, then construction of a domain view over one
of them and simultaneous writing through the other to
interior elements marked as unaliased, will cause the domain
view to be undefined behavior. Do not combine domain views
and .set_aliased
calls.
Indicates that a BitSlice
region touches at least one edge
index of any number of elements.
This contains two optional references to the aliased edges, and one reference to the unaliased middle. Each can be queried and used individually.
Implementations
Attempts to view the domain as an enclave variant.
Parameters
self
Returns
If self
is the Enclave
variant, this returns Some
of the
enclave fields, as a tuple. Otherwise, it returns None
.
Attempts to view the domain as the region variant.
Parameters
self
Returns
If self
is the Region
variant, this returns Some
of the
region fields, as a tuple. Otherwise, it returns None
.
Trait Implementations
Removes and returns an element from the end of the iterator. Read more
iter_advance_by
)Advances the iterator from the back by n
elements. Read more
Returns the n
th element from the end of the iterator. Read more
This is the reverse version of Iterator::try_fold()
: it takes
elements starting from the back of the iterator. Read more
An iterator method that reduces the iterator’s elements to a single, final value, starting from the back. Read more
Advances the iterator and returns the next value. Read more
Returns the bounds on the remaining length of the iterator. Read more
Consumes the iterator, counting the number of iterations and returning it. Read more
Consumes the iterator, returning the last element. Read more
iter_advance_by
)Advances the iterator by n
elements. Read more
Returns the n
th element of the iterator. Read more
Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more
1.0.0 · sourcefn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator<Item = Self::Item>,
fn chain<U>(self, other: U) -> Chain<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator<Item = Self::Item>,
Takes two iterators and creates a new iterator over both in sequence. Read more
1.0.0 · sourcefn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator,
fn zip<U>(self, other: U) -> Zip<Self, <U as IntoIterator>::IntoIter> where
U: IntoIterator,
‘Zips up’ two iterators into a single iterator of pairs. Read more
iter_intersperse
)Creates a new iterator which places a copy of separator
between adjacent
items of the original iterator. Read more
fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G> where
G: FnMut() -> Self::Item,
fn intersperse_with<G>(self, separator: G) -> IntersperseWith<Self, G> where
G: FnMut() -> Self::Item,
iter_intersperse
)Creates a new iterator which places an item generated by separator
between adjacent items of the original iterator. Read more
Takes a closure and creates an iterator which calls that closure on each element. Read more
Calls a closure on each element of an iterator. Read more
Creates an iterator which uses a closure to determine if an element should be yielded. Read more
Creates an iterator that both filters and maps. Read more
Creates an iterator which gives the current iteration count as well as the next value. Read more
Creates an iterator that yields elements based on a predicate. Read more
Creates an iterator that both yields elements based on a predicate and maps. Read more
Creates an iterator that skips the first n
elements. Read more
Creates an iterator that yields the first n
elements, or fewer
if the underlying iterator ends sooner. Read more
Creates an iterator that works like map, but flattens nested structure. Read more
Creates an iterator that flattens nested structure. Read more
Does something with each element of an iterator, passing the value on. Read more
Borrows an iterator, rather than consuming it. Read more
Transforms an iterator into a collection. Read more
Consumes an iterator, creating two collections from it. Read more
fn partition_in_place<'a, T, P>(self, predicate: P) -> usize where
T: 'a,
Self: DoubleEndedIterator<Item = &'a mut T>,
P: FnMut(&T) -> bool,
fn partition_in_place<'a, T, P>(self, predicate: P) -> usize where
T: 'a,
Self: DoubleEndedIterator<Item = &'a mut T>,
P: FnMut(&T) -> bool,
iter_partition_in_place
)Reorders the elements of this iterator in-place according to the given predicate,
such that all those that return true
precede all those that return false
.
Returns the number of true
elements found. Read more
iter_is_partitioned
)Checks if the elements of this iterator are partitioned according to the given predicate,
such that all those that return true
precede all those that return false
. Read more
An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more
An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more
Folds every element into an accumulator by applying an operation, returning the final result. Read more
Reduces the elements to a single one, by repeatedly applying a reducing operation. Read more
iterator_try_reduce
)Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately. Read more
Tests if every element of the iterator matches a predicate. Read more
Tests if any element of the iterator matches a predicate. Read more
Searches for an element of an iterator that satisfies a predicate. Read more
Applies function to the elements of iterator and returns the first non-none result. Read more
try_find
)Applies function to the elements of iterator and returns the first true result or the first error. Read more
Searches for an element in an iterator, returning its index. Read more
1.0.0 · sourcefn rposition<P>(&mut self, predicate: P) -> Option<usize> where
P: FnMut(Self::Item) -> bool,
Self: ExactSizeIterator + DoubleEndedIterator,
fn rposition<P>(&mut self, predicate: P) -> Option<usize> where
P: FnMut(Self::Item) -> bool,
Self: ExactSizeIterator + DoubleEndedIterator,
Searches for an element in an iterator from the right, returning its index. Read more
Returns the maximum element of an iterator. Read more
Returns the minimum element of an iterator. Read more
Returns the element that gives the maximum value from the specified function. Read more
Returns the element that gives the maximum value with respect to the specified comparison function. Read more
Returns the element that gives the minimum value from the specified function. Read more
Returns the element that gives the minimum value with respect to the specified comparison function. Read more
Reverses an iterator’s direction. Read more
Converts an iterator of pairs into a pair of containers. Read more
Creates an iterator which copies all of its elements. Read more
Repeats an iterator endlessly. Read more
Sums the elements of an iterator. Read more
Iterates over the entire iterator, multiplying all the elements Read more
Lexicographically compares the elements of this Iterator
with those
of another. Read more
fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering where
I: IntoIterator,
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,
fn cmp_by<I, F>(self, other: I, cmp: F) -> Ordering where
I: IntoIterator,
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Ordering,
iter_order_by
)Lexicographically compares the elements of this Iterator
with those
of another with respect to the specified comparison function. Read more
1.5.0 · sourcefn partial_cmp<I>(self, other: I) -> Option<Ordering> where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn partial_cmp<I>(self, other: I) -> Option<Ordering> where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Lexicographically compares the elements of this Iterator
with those
of another. Read more
fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering> where
I: IntoIterator,
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,
fn partial_cmp_by<I, F>(self, other: I, partial_cmp: F) -> Option<Ordering> where
I: IntoIterator,
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> Option<Ordering>,
iter_order_by
)Lexicographically compares the elements of this Iterator
with those
of another with respect to the specified comparison function. Read more
1.5.0 · sourcefn eq<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
fn eq<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
fn eq_by<I, F>(self, other: I, eq: F) -> bool where
I: IntoIterator,
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,
fn eq_by<I, F>(self, other: I, eq: F) -> bool where
I: IntoIterator,
F: FnMut(Self::Item, <I as IntoIterator>::Item) -> bool,
iter_order_by
)1.5.0 · sourcefn ne<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
fn ne<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialEq<<I as IntoIterator>::Item>,
1.5.0 · sourcefn lt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn lt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
less than those of another. Read more
1.5.0 · sourcefn le<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn le<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
less or equal to those of another. Read more
1.5.0 · sourcefn gt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn gt<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
greater than those of another. Read more
1.5.0 · sourcefn ge<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
fn ge<I>(self, other: I) -> bool where
I: IntoIterator,
Self::Item: PartialOrd<<I as IntoIterator>::Item>,
Determines if the elements of this Iterator
are lexicographically
greater than or equal to those of another. Read more
is_sorted
)Checks if the elements of this iterator are sorted. Read more
is_sorted
)Checks if the elements of this iterator are sorted using the given comparator function. Read more
fn is_sorted_by_key<F, K>(self, f: F) -> bool where
F: FnMut(Self::Item) -> K,
K: PartialOrd<K>,
fn is_sorted_by_key<F, K>(self, f: F) -> bool where
F: FnMut(Self::Item) -> K,
K: PartialOrd<K>,
is_sorted
)Checks if the elements of this iterator are sorted using the given key extraction function. Read more
Auto Trait Implementations
impl<'a, T> RefUnwindSafe for Domain<'a, T> where
<T as BitStore>::Alias: RefUnwindSafe,
<T as BitStore>::Mem: RefUnwindSafe,
impl<'a, T> UnwindSafe for Domain<'a, T> where
<T as BitStore>::Alias: RefUnwindSafe,
<T as BitStore>::Mem: UnwindSafe + RefUnwindSafe,
Blanket Implementations
Mutably borrows from an owned value. Read more
Causes self
to use its Binary
implementation when Debug
-formatted.
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more
Provides immutable access to the reference for inspection.
Calls tap_ref
in debug builds, and does nothing in release builds.
Provides mutable access to the reference for modification.
Calls tap_ref_mut
in debug builds, and does nothing in release builds.
Provides immutable access to the borrow for inspection. Read more
Calls tap_borrow
in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
Immutably dereferences self
for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref
in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self
for modification.