Struct casper_types::AccessRights
source ·
[−]pub struct AccessRights { /* private fields */ }
Expand description
A struct which behaves like a set of bitflags to define access rights associated with a
URef
.
Implementations
Permission to read or write the value under the associated URef
.
Permission to read, add to, or write the value under the associated URef
.
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
Returns true
if there are flags common to both self
and other
.
Returns true
if all of the flags in other
are contained within self
.
Inserts or removes the specified flags depending on the passed value.
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Returns true
if the READ
flag is set.
Returns true
if the WRITE
flag is set.
Returns true
if the ADD
flag is set.
Trait Implementations
Disables all flags disabled in the set.
Returns the union of the two sets of flags.
type Output = Self
type Output = Self
The resulting type after applying the |
operator.
Adds the set of flags.
Toggles the set of flags.
Deserialize this value from the given Serde deserializer. Read more
Generate a random value of T
, using rng
as the source of randomness.
Create an iterator that generates random values of T
, using rng
as
the source of randomness. Read more
Extends a collection with the contents of an iterator. Read more
extend_one
)Extends a collection with exactly one element.
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
Creates a value from an iterator. Read more
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
This method tests for !=
.
This method returns an ordering between self
and other
values if one exists. Read more
This method tests less than (for self
and other
) and is used by the <
operator. Read more
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
Disables all flags enabled in the set.
Returns the length of the Vec<u8>
which would be returned from a successful call to
to_bytes()
or into_bytes()
. The data is not actually serialized, so this call is
relatively cheap. Read more
Auto Trait Implementations
impl RefUnwindSafe for AccessRights
impl Send for AccessRights
impl Sync for AccessRights
impl Unpin for AccessRights
impl UnwindSafe for AccessRights
Blanket Implementations
Mutably borrows from an owned value. Read more
Causes self
to use its Binary
implementation when Debug
-formatted.
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
Causes self
to use its Octal
implementation when Debug
-formatted.
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
Pipes a reference into a function that cannot ordinarily be called in suffix position. Read more
Provides immutable access to the reference for inspection.
Calls tap_ref
in debug builds, and does nothing in release builds.
Provides mutable access to the reference for modification.
Calls tap_ref_mut
in debug builds, and does nothing in release builds.
Provides immutable access to the borrow for inspection. Read more
Calls tap_borrow
in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
Immutably dereferences self
for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref
in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self
for modification.